Murata have announced the release of the third generation of the DMR20 series of round, miniature digital panel frequency monitors. Designed to measure and display AC mains frequencies in the range of 45 to 65 Hertz, over an input voltage of 85 to 264 VAC, the monitor is suitable for mounting in an industry-standard “oiltight” 30 and 30.5 mm / 1.2 inch round panel cutout. The new DMR20-1-FM-R-C is the world’s smallest, self-powered, ac line frequency monitor. Simply connect 85 to 264Vac (45-65Hz) power and the meter is fully operational—no additional components are required. The unit can also measure distorted 120Vrms power sources with triangle and square waveforms, as well as quasi sine wave outputs of dc to ac power inverters.
Equipped with a quartz crystal-controlled microcontroller-based timing circuitry the DMR20-1-FM-R-C frequency monitor is a self-powered, 2-wire meter that does not require any additional external power sources. The meter has a display resolution of one hundredth of a Hertz (0.01Hz) from 45 to 65 Hertz, making it an attractive replacement for outdated analog frequency meters and meaning that no additional components or separate power supply is required for the unit. The monitor utilises a Red LED display as standard, this gives excellent visibility in low light conditions, there is further a choice of Green or Blue LED display depending on the requirement of the application.
The unit features a rugged housing with seamless construction on all sides, providing protection to IP67 / NEMA 6 specifications for dust, dirt, and moisture. Typical applications include use in industrial and consumer backup generators, marine instrument panels, power distribution units (PDUs), off-grid power generation, portable generators, utility test sets, and as a replacement for old analog “needle-style” frequency meters.
Simple Panel Installation
Click below to view Video of DMR20 digital panel meter in waterproof application
The DMR20-1-FM-R-C ac line frequency monitor is the third model in a new line of low-cost, LED-display, digital panel meters designed to fit standard 1.2 inch round switch cutouts. The rugged polycarbonate construction offers excellent resistance to moisture, dust, and vibration, making it ideal for applications where protection from harsh environments is required. DMR20 series can operate from -25°C to +60°C.
Anglia are offering customers a FREE sample of the DMR20-1-FM-R-C Self-powered LED Digital Panel Frequency Monitor from Murata, please fill in the form below to register your interest now.
FREE samples for UK and Ireland customers only, subject to availability.
STMicroelectronics are powering the next generation of Industry 4.0 applications with a new vibration-sensing solution optimized to enable smart maintenance of factory equipment. The IIS3DWB is a system-in-package MEMS sensor featuring a 3-axis digital vibration sensor with low noise over an ultra-wide and flat frequency range. The wide bandwidth, low noise, very stable and repeatable sensitivity, together with the capability of operating over an extended temperature range (up to +105 °C), make the device particularly suitable for vibration monitoring in industrial applications.
Power management company Eaton has introduced the C308F Bussmann Series of fast-acting, ceramic tube fuses for intrinsic safety requirements used in hazardous environments such as network barriers and other equipment used in mines, oil drilling structures, gas stations, gas meters, chemical refineries and hazardous material transportation...
Gemalto’s suite of Cinterion® EHS6T 3G Smart Terminals takes M2M simplicity to a whole new level, leveraging Gemalto’s next-generation Java® embedded technology...
Open standards and a huge ecosystem of freely available tools and code were a key ingredient in the growth and success of Java and the wildly creative Java developer community. Gemalto is moving this concept forward for the embedded space with the Cinterion Concept Board...
Gemalto’s Cinterion® EHS6T 3G Smart LAN Terminal takes M2M simplicity to a whole new level, leveraging Gemalto’s next-generation Java® embedded technology, plug-and-play solutions are powered by a five-band HSPA+ baseband engine enabling high-speed, secure wireless TCP/IP connectivity for a variety of industrial applications...
The Cinterion® Connect Shield is an easy-to-use maker board, based on the ELS61-E LTE Cat.1 cellular module, that combines the flexible and widely used Arduino open source platform with Gemalto’s reliable and highly efficient cellular connectivity...
Gemalto, the world leader in digital security, is expanding Industrial IoT connectivity with a significant breakthrough in wireless engineering – the industry's first IoT module to provide global connectivity on 12 LTE bands plus, global 3G and global 2G cellular coverage all from a single device...