Theses intelligent power switches integrate detailed diagnosis and advanced protections. To meet high automotive standards and thermal stress (fast thermal transients), ST 24V M0-A5 devices embed an internal control, called Power Limitation, that reduces silicon degradation by turning off the internal vertical power MOSFET when the junction temperature increases suddenly.
Key characteristics
■ One or two channels ■ Analog or digital output statuses available ■ Supply voltage operating range: 8 V to 36 V ■ ILOADMAX: 16 A to 90 A ■ Clamping voltage: >58 V ■ Short circuit ruggedness up to 32V with 40mH stray inductance
Diagnosis ■ Proportional load current sense ■ Open load detection ■ Output short to VCC detection ■ Overload and short to ground latch-off ■ Thermal shutdown ■ Fault reset
Protections ■ Load current limitation ■ Undervoltage shut-down ■ Overvoltage clamp ■ Reverse battery protection ■ Thermal shutdown latch-off ■ Loss of ground and loss of VCC
Product portfolio
Product name
Load
ILIMMAX
RON(max)
Package
VND5T100A*
1x 21W
16A
2x 100mΩ
PSSO-12 / SO-16
VND5T050A*
2x 21W
24A
2x 50mΩ
PSSO-24 / SO-16L
VND5T035A*
3x 21/55W
30A
2x 35mΩ
VND5T016ASP
1x 75W
43A
2x 16mΩ
PSO-16
VN5T016AH
4x 21W
48A
1x 16mΩ
HPAK
VN5T006ASP
> 150W
90A
1x 6mΩ
PSO-10
Click here to go to STMicroelectronics website for more information on Automotive High Side Switches
The STM32WBA wireless microcontroller Series from STMicroelectronics brings designers the performance, efficiency, and security required for Bluetooth Low Energy enabled applications.
The STM32U3 families have been developed for applications where efficient power management is essential, while still delivering the functionality expected from a contemporary 32-bit MCU platform.
STMicroelectronics have introduced the L6986I device, a high-performance synchronous buck converter that is designed for use in applications that require isolated power conversion.
Introducing STMicroelectronics New STM32C5 Series of Powerful MCUs for Cost‑Optimised Designs. Samples and evaluation kit available from Anglia.
STMicroelectronics is advancing Industry 5.0 with a new generation of smart, high accuracy MEMS sensors that integrate machine learning cores (MLC) and intelligent sensor processing units (ISPU) for local, ultra low power analytics at the edge.
STMicroelectronics has unveiled the ST1VAFE3BX, the first dual-function biosensor combining a vertical analog front-end (vAFE) for detecting biopotential signals and a 3-axis ultralow-power accelerometer for motion tracking.