The Zephyr™ Digital Airflow Sensors from Honeywell are available in a wide range of airflows. With recent additions to the Zephyr™ range including low flow ranges 0-10 and 0-15 SLPM and high flow ranges 0-50, 0-100, and 0-300 SLPM, Honeywell now offer one of the industry’s broadest range of Digital airflow sensors available today.
The Honeywell Zephyr™ HAF Series sensors provide a digital interface for reading airflow over specified full-scale flow and compensated temperature ranges. The thermally isolated heater and temperature sensing elements help these sensors provide a fast response to air or gas flow. The sensors are designed to measure mass flow of air and other non-corrosive gases.
Standard flow ranges available are 10 SLPM, 15 SLPM, 20 SLPM, 50 SLPM, 100 SLPM, 200 SLPM or 300 SLPM, with custom flow ranges also available.
The sensors are fully factory calibrated and temperature compensated with an on-board Application Specific Integrated Circuit (ASIC).
The HAF Series >10 SLPM is compensated over the calibrated temperature range of 0 °C to 50 °C [32 °F to 122 °F]. The state-of-the-art ASIC-based compensation provides digital (I2C) outputs with a response time of 1 ms.
The Zephyr™ Digital Airflow Sensors operate on the heat transfer principle to measure mass airflow, they consist of a microbridge Microelectronic and Microelectromechanical System (MEMS) with temperature-sensitive resistors deposited with thin films of platinum and silicon nitride. The MEMS sensing die is located in a precise and carefully designed airflow channel to provide repeatable response to flow.
The Zephyr™ Digital Airflow Sensors provide customers with enhanced reliability, high accuracy, repeatable measurements, and the ability to customize sensor options to meet many specific application needs. The new expanded range of airflows can optimize the customers’ system accuracy by providing a sensor that is matched to the airflow range required by the application. In addition the combination of rugged housings with a stable substrate makes the Zephyr™ products extremely robust.
The Zephyr™ Digital Airflow Sensors have been designed and manufactured according to ISO 9001 standards and due to the wide range of airflows available they can be used in many medical or industrial applications:
Medical
Industrial
Anglia are offering customers FREE samples of the Zephyr™ Digital Airflow Sensors from Honeywell, fill in the form below to register your interest now.
FREE samples for UK and Ireland customers only, subject to availability.
STMicroelectronics are powering the next generation of Industry 4.0 applications with a new vibration-sensing solution optimized to enable smart maintenance of factory equipment. The IIS3DWB is a system-in-package MEMS sensor featuring a 3-axis digital vibration sensor with low noise over an ultra-wide and flat frequency range. The wide bandwidth, low noise, very stable and repeatable sensitivity, together with the capability of operating over an extended temperature range (up to +105 °C), make the device particularly suitable for vibration monitoring in industrial applications.
Power management company Eaton has introduced the C308F Bussmann Series of fast-acting, ceramic tube fuses for intrinsic safety requirements used in hazardous environments such as network barriers and other equipment used in mines, oil drilling structures, gas stations, gas meters, chemical refineries and hazardous material transportation...
Gemalto’s suite of Cinterion® EHS6T 3G Smart Terminals takes M2M simplicity to a whole new level, leveraging Gemalto’s next-generation Java® embedded technology...
Open standards and a huge ecosystem of freely available tools and code were a key ingredient in the growth and success of Java and the wildly creative Java developer community. Gemalto is moving this concept forward for the embedded space with the Cinterion Concept Board...
Gemalto’s Cinterion® EHS6T 3G Smart LAN Terminal takes M2M simplicity to a whole new level, leveraging Gemalto’s next-generation Java® embedded technology, plug-and-play solutions are powered by a five-band HSPA+ baseband engine enabling high-speed, secure wireless TCP/IP connectivity for a variety of industrial applications...
The Cinterion® Connect Shield is an easy-to-use maker board, based on the ELS61-E LTE Cat.1 cellular module, that combines the flexible and widely used Arduino open source platform with Gemalto’s reliable and highly efficient cellular connectivity...
Gemalto, the world leader in digital security, is expanding Industrial IoT connectivity with a significant breakthrough in wireless engineering – the industry's first IoT module to provide global connectivity on 12 LTE bands plus, global 3G and global 2G cellular coverage all from a single device...