The ADA4522 series of Zero-Drift, Precision Op Amps from Analog Devices help to simplify board design. The high-voltage, low-noise, zero-drift, precision operational amplifiers reduce system noise, cost, board space, and development time by providing on-chip electro-magnetic interference (EMI) filtering and eliminating the need for calibration circuitry.
The ADA4522-1/ADA4522-2/ADA4522-4 are single/dual/quad channel, zero-drift op amps with low noise and power, ground sensing inputs, and rail-to-rail output, optimized for total accuracy over time, temperature, and voltage conditions. The wide operating voltage and temperature ranges, as well as the high open-loop gain and very low dc and ac errors make the devices well suited for amplifying very small input signals and for accurately reproducing larger signals in a wide variety of applications.
Data
The ADA4522 series performance is specified at 5.0 V, 30 V, and 55 V power supply voltages. The devices operate over the range of 4.5 V to 55 V, and are excellent for applications using single-ended supplies of 5 V, 10 V, 12 V, and 30 V, or for applications using higher single supplies and dual supplies of ±2.5 V, ±5 V, and ±15 V.
Exhibiting noise performance that is at least 35 percent better than the closest competitor, the ADA4522 series provides the ease-of-use of a precision op amp with the ultra-low offset and drift of a zero-drift op amp.
Utilising on-chip filtering to achieve high immunity to electromagnetic interference (EMI) the ADA4522 series are fully specified over the extended industrial temperature range of −40°C to +125°C. Devices are available in 8-lead MSOP or 8-lead SOIC packages for ADA4522-1/2 variants and 14-lead SOIC or 14-lead TSSOP packages for ADA4522-4.
The ADA4522 series series is suitable for a wide range of applications, including precision current sensing in electronic loads, power supplies, motor control and offset correction in composite amplifiers used in instrumentation and other applications.
Click here to read the zero-drift amp technical article.
To aid the design process, the ADA4522 series series is supported by a range of Universal Precision Op Amp Evaluation Boards, these have been designed and optimized for many circuit configurations allowing the users to best suit their applications.
Anglia are offering customers a FREE Universal Precision Op Amp Evaluation Board and samples of the ADA4522 series of Zero-Drift, Precision Op Amps from Analog Devices, please complete the form below to request your FREE samples.
FREE samples for UK and Ireland customers only, subject to availability.
STMicroelectronics are powering the next generation of Industry 4.0 applications with a new vibration-sensing solution optimized to enable smart maintenance of factory equipment. The IIS3DWB is a system-in-package MEMS sensor featuring a 3-axis digital vibration sensor with low noise over an ultra-wide and flat frequency range. The wide bandwidth, low noise, very stable and repeatable sensitivity, together with the capability of operating over an extended temperature range (up to +105 °C), make the device particularly suitable for vibration monitoring in industrial applications.
Power management company Eaton has introduced the C308F Bussmann Series of fast-acting, ceramic tube fuses for intrinsic safety requirements used in hazardous environments such as network barriers and other equipment used in mines, oil drilling structures, gas stations, gas meters, chemical refineries and hazardous material transportation...
Gemalto’s suite of Cinterion® EHS6T 3G Smart Terminals takes M2M simplicity to a whole new level, leveraging Gemalto’s next-generation Java® embedded technology...
Open standards and a huge ecosystem of freely available tools and code were a key ingredient in the growth and success of Java and the wildly creative Java developer community. Gemalto is moving this concept forward for the embedded space with the Cinterion Concept Board...
Gemalto’s Cinterion® EHS6T 3G Smart LAN Terminal takes M2M simplicity to a whole new level, leveraging Gemalto’s next-generation Java® embedded technology, plug-and-play solutions are powered by a five-band HSPA+ baseband engine enabling high-speed, secure wireless TCP/IP connectivity for a variety of industrial applications...
The Cinterion® Connect Shield is an easy-to-use maker board, based on the ELS61-E LTE Cat.1 cellular module, that combines the flexible and widely used Arduino open source platform with Gemalto’s reliable and highly efficient cellular connectivity...
Gemalto, the world leader in digital security, is expanding Industrial IoT connectivity with a significant breakthrough in wireless engineering – the industry's first IoT module to provide global connectivity on 12 LTE bands plus, global 3G and global 2G cellular coverage all from a single device...